RV1 Series

HLR

36mm

Freeride / DH (26", 27.5")

Introduced in 2014, the RV1 continues to gain speed in with added options for 2015. The RV1 features a host of innovative features, including carbon leg guards to protect the magnesium casting, Neutra-Valve bleed ports to release pressure built up in the lowers, and a super lightweight crown and casting design to create a 200mm travel fork at 2767 grams. With new crown options, including drop crowns and dedicated offsets for 27.5” wheels, and our tried and trusted twin-tube HLR damping system, the RV1 is THE fork for performance minded riders everywhere.

RV1 Series

HLR

36mm

Freeride / DH (26", 27.5")

Introduced in 2014, the RV1 continues to gain speed in with added options for 2015. The RV1 features a host of innovative features, including carbon leg guards to protect the magnesium casting, Neutra-Valve bleed ports to release pressure built up in the lowers, and a super lightweight crown and casting design to create a 200mm travel fork at 2767 grams. With new crown options, including drop crowns and dedicated offsets for 27.5” wheels, and our tried and trusted twin-tube HLR damping system, the RV1 is THE fork for performance minded riders everywhere.

Metric Series

HLR

36mm

Enduro / All Mountain / Freeride / Downhill (26", 27.5")

For 2015, the Metric now boasts dedicated crown offsets for both 26 and 27.5” wheels. The Metric features a host of other innovative features, including carbon leg guards to protect the magnesium casting, Neutra-Valve bleed ports to release pressure built up in the lowers, Flux-Piston air spring system to reduce internal seal drag significantly, and a super light weight crown and casting design to create a 180mm travel fork at 2200 grams. With the increased control that dedicated offsets offer, and utilizing our tried and trusted HLR damping system, the Metric is THE fork for performance minded riders everywhere.

Revel Series

HLR

34mm

Trail / All Mountain / Enduro (27.5", 29")

The REVEL was designed for riders looking for performance they have never experienced in the outside of the down hill fork market. The mission statement for this project was to create the best performing suspension fork without cutting any corners or being held back by cost limitations. No detail was overlooked in the development of this fork and it will be hand assembled in the US by X-Fusion USA. Limited quantities will be produced, as this is a special product for those who desire quality and exclusivity.

Sweep Series

RC HLR /RL2R / RL2

34mm

Trail / All Mountain / Enduro (27.5")

The Sweep series is our new 27.5 inch wheel fork for 2014. It spawned from our 26 inch Slant series that was developed to bridge the gap between lightweight trail forks and high performance all-mountain forks using a 34mm chassis. The Sweep has been given a dedicated offset of 46mm that you will now find on all of our 27.5 inch forks. New for 2014 and included on the Sweep is our LockX axle system allowing riders to quickly and safely remove and install their front wheels on the fly. Lastly, the Sweep comes equipped with our test winning and most efficient RL2 damper systems in a svelte, but stout chassis allowing you to dominate the trail in any direction.

Slant Series

RL2R / RL2

34mm

Trail / Enduro (26")

The Slant series was developed to bridge the gap between lightweight trail forks and high performance all-mountain forks. At X-Fusion we have taken note that not only suspension products have been progressing over the last few years, but the rider has as well. You all are fitter, faster, stronger and are looking for a product to match. The 34mm stanchion tube chassis provides the perfect balance between weight and strength in the trail and all-mountain category. The Slant comes equipped with our most efficient RL2 damper systems in a svelte, but stout chassis allowing you to dominate the trail in any direction.

Trace Series

RC HLR / RL2R / RL2

34mm

Cross Country / Trail / All Mountain / Enduro (29")

Developed for the new progression of 29er bikes with longer travel and aggressive angles, the Trace offers a stout chassis with smooth & efficient damping. The RL2 damper will eat away the small bumps while the mid-valve provides unprecedented mid to ending stroke support. Also offered in the Trace line is the Uni-Crown. The Uni-Crown is a single piece crown steerer that increases chassis strength at that junction by over 50%! With the Trace’s progressive new-school damping and light and stout chassis, riders will no longer have shy away from the most technical bits of trail but will be looking for what they can conquer next.

Slide Series

RL2R / RL2

32mm

Cross Country / Trail (29")

The younger taller brother of the Velvet is born to bring a performance level XC fork at a cost effective price to the 29’er market. The Slide 29’s 120mm of extremely controlled travel comes within it’s lightweight chassis and offers an on the fly lockout switch for maximum efficiency. Whether you need a reliable race fork or are out exploring the back-country, the slide promises to deliver a smooth, consistent ride for as long as your legs will keep spinning.

Streat Series

RL2

32mm

Cross Country / Trail (26", 27.5")

The new STREAT series is our 32mm chassis, 27.5 specific, XC and Trail Fork. Having up to 140mm’s of travel, remote compatible or lever actuated lockout, and a dedicated crown offset, the Streat is all-day-every-day fork for those looking to move to a new wheel size. In addition to the performance features, the Streat is offered with either 1 1/8” or Tapered steer tube configurations and with either our X-15 tool-less axle system or industry standard 9mm.

Velvet Series

RL2R / RL2

32mm

Cross Country / Trail (26”)

The Velvet series is our 32mm chassis XC and Trail Fork. Having 140mm’s of travel, remote or lever actuated lockout (convertible), and the option of our DLA travel adjust system, the Velvet is prepared to go for as long as your legs can keep spinning those gears. In addition to the performance features, the Velvet is offered in multiple steerer tube configurations and with either our X-15 tool-less axle system or industry standard 9mm.